![]() ![]() If the data won’t be downloaded immediately, take advantage of the Well Sounder’s ability to give each well an ID number, which will be stored with the logged data to help keep the data organized. The Well Sounder 2010 PRO determines static water level in wells by using sound waves to measure the distance from the top of the well to the water level. There is no special software required and it works with any operating system. This puts limitations on the maximum injection rates per well. This is the most commonly used pumping test method for obtaining estimates of aquifer properties. Constant-rate tests maintain pumping at the control well at a constant rate. chemical deposition caused premature failure of these devices. ![]() The logged information can be easily downloaded with the included USB Cable and will be displayed as a data file to be opened in a program of your choosing. Therefore, at low reservoir pressure the pipeline must be operated in gas or two-phase conditions. Common types of pumping tests that you may perform include the following. step-drawdown tests on the selected wells. After you are done with the test simply return to the testing site and retrieve the Well Sounder 2010 PRO. Although these water courses are small, still they have an increasing. The water level meter will turn on, take a measurement and turn itself back off. Sonar survey of shallow water bodies has challenged scientists for a long time. ![]() It also has a power save function, which will put the unit to sleep between measurements to save battery life. During injection tests and falloff tests, fluid is injected into the formation, and BHP, which. Our Well Sounder 2010 PRO is available with or without the WS131 Flow Meter to fit the needs of professionals looking for static levels or complete drawdown/flow testing. Other tank fill or tank drawdown tests have verified the use. By contrast, for drawdown tests, engineers open the well after a specified shut-in period to observe BHP decrease. The sonar-based flowmeter is well suited to measuring aggressive slurry flows with variable. These water level meters can be set to take measurements at intervals between 1-60 minutes. Buildup tests are performed by shutting in the well after some period of flow to measure increase in bottomhole pressure (BHP). This water level indicator also allows the user to perform unsupervised drawdown testing or long term groundwater monitoring with it’s built-in data logger capable of storing up to 25 million time/date stamped data points. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |